1. The backlit screen on the remote shuts off after 5 seconds. The device and remote are still on. To illuminate the screen light again, simply press the + or - button. If the device/remote are on, pressing the power button will shut off the device a
*The device/remote does not need to be charged after each use. After several uses, they require charging.*. Step 1. Ensure you are using a 5v output wall adapter or a computer USB port. (Most smartphone wall adapters are 5v output and all computer US
First, turn on the device, then the remote. The device will flash a faint blue light when it is on. (It's easiest to see this in a darker room). Once the device and remote are on, they will connect and the remote will display a connection symbol like
We recommend following our Corrective Care Protocol Attached Below. The NeuroMD Corrective Therapy Device can be used everyday however, If you experience muscle soreness, we recommend taking a break for 1-2 days. Many of our customers use the device
1. Always turn on the device first and then turn on the remote. (The remote will only turn on after the device is on and the light on the remote will only illuminate when adjusting intensity. To test if remote is on/connected with the device, simply
Charging frequency varies based on the intensity level used during the sessions. The device/remote does not need to be charged after each use. After several uses, they require charging. A good rule of thumb is charging every 3-9 uses.